Preparation before the empty running test of a small internal mixer

November 24, 2023

Preparation before the empty running test of a small internal mixer
1: The empty running test of the internal mixer must be carried out after the foundation is completely dry and solid.
2: Check for foreign objects in all parts of the mixer, and check for loose connections and fasteners.
3: Check whether the lubrication pipelines and hydraulic pipelines of the internal mixer are connected correctly, whether the amount of lubrication and hydraulic oil used is appropriate, whether the oil level is appropriate, and whether the lubrication of the lubrication parts is in place.
4: The auxiliary equipment of the internal mixer needs to undergo a separate inspection and test before idling to verify whether its performance meets the specified requirements.
5: Check whether the coordination between the electrical equipment of the mixer and the hydraulic and pneumatic systems is accurate and correct.
6: Before connecting the coupling to the mixer, first idle the main motor for 20 minutes, and then install the coupling and protective cover after there are no abnormalities.
7: At the high-speed shaft end of the main reducer of the mixer or at the coupling, manually turn the transmission system to rotate the rotor for two cycles and confirm that there are no abnormalities.

Our company's products are as follows:
Small open mill: 2 inches, 3 inches, 4 inches, 6 inches, 7 inches, 8 inches, 9 inches, 10 inches, 12 inches, 14 inches, and 16 inches laboratory mixer functions include electric heating, water cooling, oil heating, integrated cooling and heating, automatic rubber flipping machine, rubber mixing machine, plastic mixing machine, and mixer

Small internal mixer: 0.05L0.1L0.2L0.3L0.5L1L2L3L5L8L10L15L20L25L35L Internal mixer desktop, pressurized, flipped, open close, clutch, closed, electrically heated water cooled laboratory internal mixer, vacuum internal mixer, metal ceramic powder internal mixer, internal mixer granulator integrated machine

Small tablet press: 5T10T20T25T30T50T65T100T150T200T300T single layer, double layer, four column, with safety door, upper layer heating and lower layer water cooling, one layer electric heating and water cooling integrated, electric heating, water cooling, oil heating, hydraulic system, manual, semi-automatic, pneumatic, fully automatic laboratory small tablet press, hot pressing molding machine, rubber and plastic molding machine.

Small vulcanizing machine: 5T10T20T25T30T50T65T100T150T200T single layer, double layer, four column, with safety door, electric heating, water cooling, oil heating, hydraulic system, pneumatic, manual, semi-automatic, fully automatic flat vulcanizing machine, vacuum vulcanizing machine.

Small extruder: screw diameter 15mm 20mm 25mm 30mm 35mm 40mm 45mm single screw extruder, double screw extruder, rubber extruder, plastic extruder, small granulator and other rubber refining equipment and extrusion equipment, with complete models and can be designed and manufactured according to customer requirements. Contact Mr. Huang for detailed product inquiries.

문의하기

Author:

Mr. GuangLei Zhu

이메일:

495433589@qq.com

Phone/WhatsApp:

+8618925886717